Here’s a step-by-step guide to performing a tablet hardness test:
Equipment Needed:
1. Tablet hardness tester (e.g., Monsanto, Dr. Schleuniger, or equivalent)
2. Tablets to be tested
3. Calibration weights (if applicable)
4. Data recording sheet
Pre-Test Preparation:
1. Ensure the tablet hardness tester is calibrated and verified.
2. Choose a representative sample of tablets (typically 10-20).
3. Remove any dust or debris from the tablets.
4. Condition the tablets to the desired temperature (e.g., 20-25°C) and humidity (e.g., 40-60%).
Test Procedure:
Monsanto Type Hardness Tester:
1. Place a tablet between the jaws of the tester.
2. Close the jaws until they touch the tablet.
3. Gradually increase the pressure until the tablet breaks.
4. Record the force required to break the tablet (in kg or N).
5. Repeat for each tablet.
Dr. Schleuniger Type Hardness Tester:
1. Place a tablet on the testing platform.
2. Adjust the testing height to ensure proper alignment.
3. Close the testing jaws.
4. The tester will automatically apply increasing pressure until the tablet breaks.
5. Record the breaking force (in kg or N).
6. Repeat for each tablet.
Digital Hardness Testers:
1. Follow the manufacturer’s instructions for calibration and testing.
2. Place a tablet on the testing platform.
3. Initiate the test.
4. Record the breaking force (in kg or N).
5. Repeat for each tablet.
Post-Test Procedures:
1. Calculate the average hardness value.
2. Record the results on a data sheet.
3. Compare the results to the established specifications.
4. Investigate any out-of-specification results.
Acceptance Criteria:
1. Minimum hardness: 4-6 kg (for most tablets)
2. Maximum variability: ± 10-20% of the average value
Tips and Considerations:
1. Handle tablets carefully to avoid damage.
2. Ensure consistent tablet orientation.
3. Use a consistent testing speed.
4. Verify tester calibration regularly.
5. Consider testing multiple tablets from different batches.
Regulatory References:
1. USP <1217> Tablet Breaking Force
2. EP 2.9.8 Tablet Hardness
3. FDA Guidelines for Tablet Hardness
By following these steps, you’ll ensure accurate and reliable tablet hardness test results.
Would you like more information on pharmaceutical testing or regulations?
ABAC
